ASTM F3708 covers a far more specific category of pressure pipe rehabilitation than the broad standards most engineers typically cite. Because it is a relatively new standard, many specifiers aren’t sure what it actually requires or how to apply it correctly.
Here is a breakdown of what ASTM F3708 covers, why it was created, and how to use it to write better pipeline rehabilitation specifications.
What Is ASTM F3708?
ASTM F3708 is the Standard Specification for Aramid Fiber Reinforced Flexible Fabric-Reinforced Pipe (FFRP) for Loose-fit, Non-Interactive Pressure Pipeline Rehabilitation. In plain terms, it’s a material and testing standard for a specific category of flexible pressure pipe liner. One that is reinforced with aramid fibers (the same fiber family behind products like Kevlar), designed to be installed as a standalone structural pipe inside an existing host pipe, without bonding to it.
The standard was developed and approved through ASTM Committee F17 on Plastic Piping Systems and formally published as F3708-25.
Why This Standard Exists
Before F3708, flexible fabric-reinforced pressure pipe liners didn’t have a dedicated ASTM material specification of their own. Engineers writing specifications for this liner category were left referencing manufacturer literature, adjacent standards written for different pipe types, or general performance requirements that didn’t fully capture how this specific technology behaves under pressure.
That gap mattered because flexible FFRP liners work differently than the pressure pipe categories that already had dedicated standards. A fiberglass pressure pipe manufactured to ASTM D3517, for example, is a rigid product with its own installed structural role. An FFRP liner is flexible, factory-manufactured, and installed as an independent pressure vessel inside an existing pipe: different material behavior, different failure modes, and different testing needs. F3708 closes that gap with a standard written specifically for this liner category.
Primus Line, the flexible FFRP system Advantage Reline installs, is one of the products this standard was written to cover. The manufacturer confirmed shortly after F3708 was published. That’s a useful reference point if you’re trying to understand what kind of product this standard was actually written to cover.
What ASTM F3708 Actually Covers
At its core, F3708 addresses:
- Material composition — FFRP made with reinforcement consisting of para-aramid fibers, or a combination of para-aramid and polyester fibers
- Manufacturing form — a continuous, factory-modified liner produced in a “U” or “C” shaped cross-section for insertion, then reverted to a round shape once installed
- Testing requirements — the material and performance testing a liner has to pass to be certified compliant with the standard
- Performance requirements — requirements used to evaluate the liner’s structural and pressure performance, including characteristics such as tensile properties and burst pressure
What it does not do is rate every liner product on the market equally. F3708 defines a specific category of product and the tests that category has to undergo to demonstrate compliance with the standard. It isn’t a general seal of approval for “trenchless pressure pipe rehabilitation” as a whole. A CIPP liner, a fold-and-form PVC liner, and an FFRP liner are all valid pressure pipeline rehabilitation approaches, but only the FFRP category is what F3708 was written to cover.
“Loose-Fit, Non-Interactive”: What That Terminology Actually Means
Two phrases in the standard’s title do a lot of work, and they’re worth understanding before you write them into a spec:
Loose-fit means the liner is not expanded to a tight, form-fitting contact with the host pipe wall the way some other lining methods are. There’s a small annular gap between the liner and the host pipe.
Non-interactive means the liner is engineered to carry the full operating pressure on its own, independent of the host pipe’s remaining structural condition. In practice, that’s a meaningful distinction for asset owners: a non-interactive liner doesn’t rely on the deteriorated pipe around it to share the structural load. Even if the host pipe has lost significant strength, a properly installed F3708-compliant liner is designed to hold pressure on its own.
That’s a very different engineering approach than a liner designed to bond tightly to the host pipe and work together with it structurally, and it’s exactly why this category needed its own standard rather than being folded into an existing one.
How ASTM F3708 Should Show Up in Your Project Specifications
If you’re writing or reviewing a specification for a pressure pipeline rehabilitation project using a flexible FFRP liner, F3708 should appear as the material standard the proposed product has to meet, not as a vague reference to “industry standard” materials.
Specifically:
- Require documentation that the proposed liner product is manufactured and tested to ASTM F3708
- Require the installing contractor to be certified by the liner manufacturer, since F3708 governs the material. Installation quality is a separate qualification
- Pair the material standard with a mandatory hydrostatic pressure test after installation, confirming actual field performance rather than just paper compliance
We cover how to build these requirements into a full procurement document in our companion post, How to Write an RFP for Pressure Pipeline Rehabilitation.
What to Ask a Contractor About F3708 Compliance
Referencing the standard in your spec is only half the job, you also need a way to verify a bidder can actually deliver on it. Worth asking:
- Can you provide manufacturer documentation confirming the proposed liner is certified to ASTM F3708?
- Are your installation crews certified by the manufacturer for this specific product?
- What pressure testing protocol will you follow after installation, and how will results be documented?
- Can you provide references from completed projects using an F3708-compliant liner specifically, not just general trenchless experience?
A contractor who can answer all four without hesitation is telling you something real about their experience with this specific liner category.
Specifying or reviewing a project that references F3708?
ASTM F3708 fills a gap that didn’t have a dedicated standard before it: aramid fiber-reinforced flexible pipe, installed loose-fit and engineered to carry full operating pressure independent of the host pipe’s condition. It’s not a catch-all pressure rehabilitation standard. It applies specifically to FFRP, not CIPP or fold-and-form PVC, so referencing it correctly in a spec means naming the product category it actually governs and requiring the manufacturer documentation and installer certification to back it up.
Advantage Reline installs Primus Line, one of the flexible FFRP products recognized under ASTM F3708, and we’re happy to walk through how this standard applies to your specific project. If your project specifications reference ASTM F3708, contact Advantage Reline to confirm the liner product and installation approach meet the standard.






